Planning and commissioning management, Integrity Management, Vendor and Sub-Contractor Selection and Management , Hydrotesting, Preservation (e.g. Corrosion Analysis and Prevention), System Drying and Flow Assurance Modelling.

Clean Systems for Higher Reliability & Safer Operations

Reliable Water Removal Solutions for Continuous Production

Decommissioning operations have become highly regulated needs for oil and gas operators. While the rate of execution is fast-paced and schedule dependent, the return on investment lacks value for the operators incurring the economic risks.

The EelReel tool is an extended reach solution to clean plugged flowlines and pipelines.

ElastiPig is a highly malleable, elastomer-solid pig that exerts minimal outwards pressure when transitioning flowlines. It creates 100% surface area contact with the pipe wall, providing excellent sealing capabilities. ElastiPigs are useful when used alone or in combination with mechanical pigs, pipeline gels and/or chemicals.

LiquiGel® pigs are reliable and superior alternatives for pipeline and process operators. Our “unstickable” pig gel technology demonstrates safe performance when measured against pipeline integrity concerns, or where multi-diameter, barriers to entry and exit, and multi-stage pigging challenges exists.

The BlueDog, utilizes a controlled jetting technique, allowing blasting action to penetrate the entire circumference of the internal pipe wall. This eliminates the bulldozing effect that often results in sticking of mechanical pigs.

The traditional way of isolating a flowline, is to install numerous blind and skillet flanges, as well as utilizing air movers, to clear the flowline of harmful vapors. When utilizing air movers, you aren’t always able to control where the vapors go once released to the atmosphere. Wind direction plays a major part in this process.

Viking Engineering has performed many materials selection projects to help operating companies produce oil and gas safely and within budget.

Preparing for operation of a major oil and gas facility is a daunting task. Viking provides standard operating procedure (SOPs) generation, maintenance planning (CMMS, Spares), FMEA and RCA studies and Control System Tuning and HMI Screen Development. 

Operations Readiness systems developed late in a project and in silos can’t reach the potential of becoming the powerful tools that they were developed to be.

Viking uses an innovative phased approach. High level SOPs are developed early based on the PFDs. These are then matured to mid-level and finally to detailed procedures as the project matures.

GATE follows a similar methodology to threat identification in risk assessment (e.g. FMEA), and analyses the relations between possible causes, and prevention and maintenance measures to highlight the cause(s) to be addressed.

Viking can help you design and implement a tailor-made Risk Based Inspection (RBI) Program.

Combining the engineering studies such as modeling, risk identification, etc. with field techniques for inspection, maintenance and surveillance, process efficiency and optimization, and rehabilition operations.

GATE can improvise, implement and manage a cost-effective plan for your asset to ensure safe and continuous operation.

Integrity engineering consulting starts at design stage where the corrosion control strategy is laid-out to reach the desired service life with minimum interruption.

At Viking, we take flow assurance engineering and modeling to operations. By using a systems engineering approach, Viking addresses the challenges from modeling to development of operational strategies to optimize flow assurance engineering in the production system. Flow assurance modeling is a key aspect of engineering design work, especially in deepwater oil and gas developments.

At Viking, we take Flow Assurance modeling to operations by using a systems engineering standpoint addressing the challenges from modeling to development of operational strategies to optimize the production system.