Onshore Pipeline Commissioning

Commissioning Service
Written By GATE Energy
shutterstock_111975017w.jpg

Planning & Commissioning Management

  • Commissioning Planning, Management and Execution

  • Full Service Execution or Client Representative Oversight

  • Quality Assurance / Quality Control

  • Health, Safety, Security and Environment (HSSE) Planning and Oversight

  • Integrity Management

  • Vendor and Sub-Contractor Selection and Management

Pipeline Commissioning

  • Hydrotesting

  • Preservation (e.g. Corrosion Analysis and Prevention)

  • System Drying

  • Flow Assurance Modelling

Services provided by GATE Energy and BlueFin.

Resources

Consult A Specialist

Featured
Mark Myhre
Mark Myhre

President of GATE Energy Commissioning

Mark is focused on growing the strength in depth of our teams while developing and implementing the strategy that will guide the evolution of GATE’s commissioning delivery in the years to come.

Connect on LinkedIn

Related Technical Articles, Courses & Calculators
Online Course: The Stream-Based HAZOP Method

This online course teaches the Stream-Based HAZOP method. The method is more effective, requires much less session time (though significantly more prework) and is much less repetitive and hence, is far less tedious for the participants.

Read More →
SIMOPs, Permits & Isolations Management: System & Personnel

Proper use of the program ensures that careful consideration is given to all potential project hazards and that suitable precautions are taken to minimize risk.

Read More →
Subsea Integrity Management - Inspectability & Maintainability Review

Subsea Integrity Management is defined as the management of a subsea system or asset to ensure that it delivers the design requirements while not adversely affecting life or the health of the environment throughout the required life of the field

Read More →
Gas Pipeline Drying Methods

A drying campaign is crucial to the commissioning of every natural gas pipeline. When done correctly, effectively and efficiently, the results can prevent hydrate formation during start up and also protect the ongoing integrity of the pipeline.

Read More →
Introduction To Leak Testing

Leak testing, commonly confused with hydrostatic testing, is a means of verifying the quality of facility construction.

Read More →
Axial Mixing In Pipe Displacement

It is frequently necessary to displace the contents of a pipeline or umbilical tube (fluid B) with another fluid (fluid A). If we don’t use a pig to separate the liquids, there will be mixing at the interface (axial mixing). The mixing zone requires us to overflush the line to effectively remove fluid B from the line.

Read More →
The Different Skill Sets Between Construction & Commissioning

Commissioning personnel have a different understanding of HSE and safety of working around live equipment. Construction sites are typically not set-up to operate a permit to work system for dynamic testing of equipment such as energizing electrical systems.

Read More →
Commissioning Lessons Learned—Methanol Systems
Read More →
Related Services
Process Facilities Commissioning
Commissioning Service
Process Facilities Commissioning
Commissioning Service

The GATE Commissioning team brings their extensive offshore oil and gas commissioning experience to the onshore sector.

Read More →
Commissioning Service
Subsea Commissioning
Commissioning Service
Subsea Commissioning
Commissioning Service

GATE Subsea IHUC activities include the pigging, testing, hook-up (static / dynamic) and commissioning of flowline / riser and controls systems from topsides to shore. As such, IHUC activities have multiple complex engineering, scheduling, ownership and scope interfaces between Well Engineering, Topsides and Subsea Facilities Design and the Operator.

Read More →
Commissioning Service
Topsides Commissioning
Commissioning Service
Topsides Commissioning
Commissioning Service

GATE has expertise in facility design, planning and execution of commissioning and start-up operations, as well as being able to provide on-site technical support during well unloading and commissioning activities. This enables a rapid response capability to unexpected events and the ability to transfer learnings to our clients.

Read More →
Commissioning Service
GATE Control of Work System (GCWS) Software
Software
GATE Control of Work System (GCWS) Software
Software

The GATE Control of Work System (GCWS) is a proprietary, cloud-based permit to work (PTW) solution designed to fulfill most oil and gas projects, yet easily adaptable for other energy construction and commissioning projects.

Read More →
Software
Onshore Pipeline Commissioning
Commissioning Service
Onshore Pipeline Commissioning
Commissioning Service

Planning and commissioning management, Integrity Management, Vendor and Sub-Contractor Selection and Management , Hydrotesting, Preservation (e.g. Corrosion Analysis and Prevention), System Drying and Flow Assurance Modelling.

Read More →
Commissioning Service
▸ Specialty Field Services
Main Service
▸ Specialty Field Services
Main Service

Our strategy is simple. Develop an industry-recognized team with the credentials, competencies, and resources that deliver safe and successful projects.

Read More →
Main Service
Prho™: SCSSV Leak Rate Calculation Tool
Software
Prho™: SCSSV Leak Rate Calculation Tool
Software

The SCSSV Leak Rate Calculation tool uses the GATE Prho™ engine to simulate the commonly used SCSSV leak test protocol.

Read More →
Software
GATE Energy
Previous

GATE Control of Work System (GCWS) Software
Next

▸ Specialty Field Services