Circuitization aims to reduce overhead inspection costs through the thoughtful break down of a system into smaller sections.

In recent years, the BSEE Safety Inspection Program section has been developing a risk-based approach to augment these inspections.

This information provides insight to aid in preventing common failures and improving industry practices to reduce incident rates in addition to saving time and money.

Now its time to assess the TOLC risk and the corresponding locations in the system where TOLC may occur. From there we can determine the appropriate mitigation and control strategies.

The building blocks of a robust inspection program are condition monitoring locations (CMLs). As defined by API 510 and API 570, CMLs are designated locations on pressure vessels or piping systems where periodic external examinations are conducted to assess condition.

At GATE Energy, we have the technical knowledge and experience to apply our own approach to souring prediction which can enable design and operational decisions to be made to mitigate the risks associated with such H2S production.

Seawater injection is a vital tool for the economic success of some projects and those projects need to ensure that the seawater can be effectively delivered from the seawater source to the reservoir.

In Part 2 of this GATEKEEPER series, we will look at the different approaches available to assess risk in the system and will discuss the mitigation options available to us.

This article will outline the challenges during integrity management, and the best practices that ultimately deliver a coordinated, effective, and cost-optimized IM plan.

In determination of consequence and risk assignment, multiple aspects are considered such as the impact of failure on the health and safety of personnel and community in the impacted area, environment, cost of recovery (cleaning, maintenance, extent of operation, repairs) and business.

Oil well stimulation is commonly undertaken using aqueous solutions of hydrochloric acid (HCl), hydrofluoric acid (HF), organic acids or mixture. The use of these acids will open new channels near the wellbore region for the oil and gas flow through and will result in increased production.

In this GATEKEEPER, the philosophy around the materials selection and corrosion monitoring is discussed as the primary design barrier to corrosion and cracking in critical parts of a subsea system.

This series of two articles discusses the diagnosis, detection and remediation of oil and gas production system blockages in detail. The current issue focuses on blockage characterization and detection.

This book is an exploration of what decision theory has to say about these and other common engineering problems.

The GATE Stream-based HAZOP process avoids these pitfalls via some novel modifications to the process. You can obtain a copy of the book here.

The following material properties are important when understanding the limitations of API 5CT high strength steels: yield strength (YS), Charpy V-notch (CVN) impact energy, hardness and tempering.

This GATEKEEPER article focuses on the prediction, prevention and remediation of liquid loading, including discussion of liquid loading analysis.

An empirical method for improving the predictability of NACE TM0177 Method A Tensile tests on modified 13Cr 110 ksi grade martensitic stainless steels based on an H2S/Chloride/pH function has previously been developed based on published data in order to address this uncertainty.

The objective of this GATEKEEPER is to provide a high-level overview of the model commonly used in the industry to estimate the wax deposition.

The design and development of a viable, robust wax management strategy relies upon the economical evaluation of available management techniques.