Efficient access to multiple permeable natural gas zones located in deep, over pressured, and extremely corrosive environments presents a challenge for South Texas operating companies.

Vacuum insulated tubing (VIT) has been used successfully to mitigate the potentially harmful effects of annular pressure buildup (APB). In a recent deepwater installation, the subject well had lost alternate APB mitigation capability through a series of events. VIT was then chosen as the only viable technology.

A method is presented such that two parameters can be used to fully describe the thermal characteristics of a tubing string undergoing an injection or production process.

Artificial lift methods transfer energy to the produced fluid with the objectives of reducing the fluid density and the pressure head or boosting the flowing pressure.

A finite difference model was developed and used to simulate transient heat transfer in wells undergoing injection and production processes.

The flow of metal during Friction Stir Welding is clarified using a faying surface tracer and a nib frozen in place during welding. It is shown that material is transported by two processes.

This paper was prepared for presentation at the SPE Applied Technology Workshop on Risk Based Design of Well Casing and Tubing held in The Woodlands, Texas, U.S.A., 7-8 May 1998.

Deepwater high pressure, high temperature (HPHT) drilling environments present difficult challenges to well engineers.

This work is a discussion of how the limit performance is being defined and quality systems are being revised for API connections in accordance with the objectives of the LRFD method for OCTG.

When tubing heated by hot formation fluids contacts colder fluids entrapped in the annulus, the result is fluid heating and pressure buildup. Proper well design is critical in subsea wells.

New integral joint connections can withstand greater loads, increasing their range of applications. The use of IJC casing can allow a slimmer well to be drilled, reducing total well costs.

A wide range of aluminum alloys and other metals and alloys, particularly dissimilar materials, have been friction-stir welded in this study.

This paper describes research efforts and technology development associated with the next generation of high pressure, high temperature (HPHT) well designs.

Friction Stir Welding is a relatively new technique for welding that uses cylindrical pin or nib inserted along the weld seam.

This paper describes an investigation into the relationship between design criteria (minimum acceptable design factors and maximum acceptable number of pipes) and cost.

This GATEKEEPER discusses an effective subsea tree PWV (USV) leak test method. The test can be done quickly – entire test time is about 15 minutes, including the 5 minute monitoring time.

Acidizing involves pumping acid into a wellbore or geologic formation that is capable of producing oil and/or gas. The purpose of acidizing is to improve a well’s productivity or injectivity after production has declined 4.

Annulus Pressure Management refers to an engineered approach ensuring that casing annulus pressures do not challenge the well’s integrity during the life of the well.

This GATEKEEPER discusses the various bacteria testing options that are available, which can be used to validate MPN results, as well as the mitigation and remediation techniques that can be used to decrease the probability or severity of MIC to pipeline infrastructure.